論文・報告
| No. | タイトル・執筆者 |
|---|---|
| 2 |
|
|
中大規模木造の仕口部に鉄筋コンクリート造や鉄骨鉄筋コンクリート造を採用する場合、転造ねじアンカーボルト(以下、ABRと称する)をコンクリートに定着させ、仕口部から突出したABRを接着剤や金物を介して柱や梁と接合する方法がある。本研究では、鉄筋コンクリートに定着されたABRの付着性能を把握するため、複数の径のABRで引抜実験を実施し、ABRの引張強さに近い応力下において、埋込深さがABR径の15~20倍以深の計測点ではひずみはほとんど生じておらず、コンクリートとの付着作用が当該位置まで及んでいないことを確認した。 キーワード : 鉄筋コンクリート、転造ねじ、定着、付着応力度、中大規模木造 |
|
|
|
|
When reinforced concrete or steel-reinforced concrete is used for the joints of medium-to large-scale timber structures, one connection method anchors rolled-thread anchor bolts (ABR) in the concrete and connects the projecting portion to timber columns or beams via adhesive or steel hardware. In this study, pull-out tests were conducted on ABRs of several diameters in order to clarify the bond performance of ABRs anchored in reinforced concrete. Under stress close to the tensile strength of the ABR, almost no strain occurred at measurement points deeper than 15-20 times the bolt diameter, confirming that bond action did not extend to those depths. Keywords : Reinforced concrete, Rolled thread, Anchorage, Bond stress, Medium-to large-scale timber structures |