論文・報告
| No. | タイトル・執筆者 |
|---|---|
| 12 |
|
|
本報は、3Dコンクリートプリンティング(3DCP)専用モルタル材料(PMO)を用いた部材における、鉄筋引抜き強度および積層界面付着強度を検討したものである。鉄筋引抜き試験では、D13、D16、D19の鉄筋をフィラメントの積層方向に対して直角および平行に配置し、JSCE-G 503-2013に準拠した引抜き試験を実施した。直角配置が最も高い付着強度を示し、層間打重ね時間の増加により強度が低下することが確認された。また、JSCE-K 561-2013に準拠した積層界面付着強度試験を実施し、鉛直方向コアの付着強度が最も低く、積層面が力学的弱点となることが明らかとなった。 キーワード : 3Dコンクリートプリンティング、鉄筋引抜き強度、積層界面付着強度、出力方向 |
|
|
|
|
This study experimentally investigated the rebar bond strength and interlayer adhesion strength in members produced by 3D Concrete Printing (3DCP) using the proprietary printable mortar "PMO". Pullout tests conforming to JSCE-G 503-2013 were conducted on D13, D16, and D19 rebars embedded perpendicular and parallel to the printing direction. Specimens with rebars placed perpendicular to the printing direction exhibited the highest bond strength, which decreased with increasing layer deposition waiting time. Supplementary layer interface adhesion tests per JSCE-K 561-2013 confirmed that vertically drilled cores had the lowest adhesion, identifying the layer interface as a mechanical weak plane in 3DCP structures. Keywords : 3D Concrete printing, Rebar bond strength, Interlayer adhesion, Printing direction |