論文・報告
| No. | タイトル・執筆者 |
|---|---|
| 3 |
|
|
山岳トンネル工事の自動化・遠隔化に向けて、トンネル工事に伴う振動を利用した微動アレー探査による切羽前方探査の適用可能性を検討した。まず、堆積岩地山を対象とした三次元FEM動的解析を実施し、空間自己相関法およびNeighborhood Algorithm(NA)法により切羽前方のS波速度構造を推定した。その結果、推定結果は解析モデルの断層位置およびS波速度構造とおおむね一致し、本手法の理論的適用可能性が確認された。さらに、施工中のトンネルにおいてロックボルト打設時の削孔振動を遠隔計測し、同様の解析を行った結果、切羽前方約10m先までの低速度領域を検出した。以上より、工事振動を利用した微動アレー探査は、トンネル切羽前方探査の遠隔化に有効な手法となる可能性が示された。 キーワード : トンネル切羽前方探査、微動アレー探査、FEM解析、山岳トンネル |
|
|
|
|
To support the automation and remote operation of mountain tunnel construction, this study investigated the applicability of microtremor array exploration using construction-induced vibrations for geological prediction ahead of a tunnel face. First, three-dimensional FEM dynamic analyses were conducted for a sedimentary rock mass, and the S-wave velocity structure ahead of the tunnel face was estimated using the spatial autocorrelation (SPAC) method and the Neighborhood Algorithm (NA). The estimated results were generally consistent with the fault location and S-wave velocity structure defined in the numerical model, confirming the theoretical applicability of the proposed method. Subsequently, field measurements were carried out during rock bolt installation in an operating tunnel. The analysis identified a low-velocity zone extending approximately 10 meters ahead of the tunnel face. These results demonstrate that microtremor array exploration using construction-induced vibrations has potential to serve as an effective method for the remote investigation of geological conditions ahead of a tunnel face. Keywords : Prediction ahead of a tunnel face, Microtremor array survey, FEM analysis, Mountain tunnel |